Mobile Welding · Scarborough, Ontario
Mobile Welding in Scarborough, Ontario
CanaWelding dispatches CWB-certified welders directly to your Scarborough site for MIG, TIG, stick, and aluminum welding, same day in most cases. As the welding division of CanaStruct Inc., an HCRA-licensed structural framing contractor, we bring documented CSA W47.1 procedures to residential, commercial, and industrial jobs across the city.
- CWB Certified · CSA W47.1
- WSIB Covered & Fully Insured
- Same-Day Dispatch
- Division of CanaStruct Inc.
What Is Mobile Welding in Scarborough?
Mobile welding in Scarborough is on-site welding performed at your property or job site by a certified welder who brings the equipment to you. Instead of trailering a beam, gate, or piece of equipment to a shop, CanaWelding sends a fully outfitted rig to Warden Avenue, the Ellesmere manufacturing corridor, the Bluffs, or wherever the work is.
CanaWelding is the welding division of CanaStruct Inc., an HCRA-licensed structural framing contractor. That background shapes how we approach a Scarborough call. Most mobile welders carry a torch. CanaWelding carries a structural pedigree, so a repair on a load-bearing frame gets the same documented process a fabrication crew would use on a construction site. We dispatch to residential, commercial, and industrial properties across Scarborough, typically the same day the call comes in.
Welding Services & Repair in Scarborough
Welding Services in Scarborough
On-Site / Mobile Welding
MIG, TIG, and stick welding brought to your Scarborough address, from a Bluffs backyard repair to a Warden Avenue plant floor.
Heavy Equipment Welding
Frame cracks, bucket repairs, and structural welds for equipment working the Ellesmere and Milliken industrial corridors.
Shipping Container Welding
Container modification and reinforcement for storage and conversion projects across Scarborough's industrial zones.
Emergency Welding
Priority same-day dispatch when a break shuts down a Scarborough site or a piece of equipment mid-shift.
Custom Metal Fabrication
Steel and aluminum fabricated to spec for Scarborough residential, commercial, and industrial projects.
Welding Repair Services in Scarborough
Welding Repair
General repair welding for gates, fences, and structural steel across Scarborough neighbourhoods, from Agincourt to West Hill.
Railing Repair & Install
Stair and balcony railing repair and installation for Scarborough homes and multi-unit buildings.
Trailer Welding Repair
Frame, hitch, and body repairs for fleets and owner-operators working out of Scarborough yards.
Heavy Equipment Welding
Field repair for excavators, loaders, and attachments without a shop tow from a Scarborough site.
Aluminum Welding in Scarborough
Aluminum needs a different process than steel, and getting it wrong shows immediately as a cracked or porous weld. CanaWelding's Scarborough crews TIG weld aluminum with grade-matched filler, ER4043 or ER5356 depending on the base alloy, for railings, marine hardware near the Bluffs waterfront, trailers, and light industrial fabrication. It is not a task we treat as an afterthought to steel work. It is a separate skill set our welders are equipped for on every truck.
Stick Welding in Scarborough
Stick welding, also called SMAW, stays the practical choice for outdoor, windy, or dirty conditions where a shielding gas would blow away before it protects the weld. Scarborough's Warden and Ellesmere industrial sites, exposed structural repairs, and older equipment with painted or rusted surfaces are exactly where stick welding still earns its place over MIG or TIG. Our CWB-certified welders carry stick capability on every Scarborough dispatch, not as a fallback option.
On-Site & Mobile Welding Coverage
Most commercial, industrial, and larger residential welding jobs in Scarborough do not have time to wait for a shop slot. CanaWelding brings MIG, TIG, and stick equipment directly to the site, so a repair gets assessed, quoted, and welded in one visit. Residential jobs, a gate hinge, a railing weld, a fence section, typically run $150 to $450. Commercial and light industrial repairs along the Warden and Ellesmere corridors typically run $350 to $800, depending on access and material.
How It Works
Assess, quote, weld, in one visit to your Scarborough site.
Assess
We look at the job on-site, material, access, and load requirements, before any welding starts.
Quote
You get a clear price before we strike an arc. What we quote is what you pay.
Weld
CWB-certified welding to CSA W47.1 procedure, documented and completed in one visit.
Who's Behind CanaWelding
Zura Mirzikashvili, Co-Owner, CanaStruct Inc.
CanaWelding is owned and operated under Zura Mirzikashvili, Co-Owner of CanaStruct Inc. and an HCRA-registered Ontario contractor with 15+ years of framing and structural work across the GTA. He built CanaWelding to close a gap he saw firsthand on job sites, welders who could lay a clean bead but did not understand the load and structural context behind it. Every welder CanaWelding assigns to a Scarborough job works under that same standard, documented, accountable, and matched to the scope of the call.
View Zura's Profile →Why Scarborough Property Owners Choose CanaWelding
CWB Certified · CSA W47.1
Not a self-declared standard. A regulated one, backed by documentation on every job.
WSIB Covered
Full WSIB coverage for every welder we send to a Scarborough site.
Fully Insured
Liability coverage on every dispatch, residential, commercial, or industrial.
Same-Day Dispatch
A 2 to 4 hour arrival window on most same-day Scarborough calls.
Division of CanaStruct Inc.
Backed by an HCRA-licensed structural framing contractor, not a standalone shop.
What We Quote Is What You Pay
A clear price before we strike an arc, no surprise line items after.
Coverage Across Scarborough
CanaWelding dispatches across all of Scarborough, from the Warden and Ellesmere industrial corridor to the Bluffs waterfront, Agincourt, Malvern, and Woburn. If you're in one of the neighbourhoods below, a same-day welder is a phone call away.
- Agincourt Central
- Malvern Northeast
- Morningside East
- Warden Ave Industrial
- Ellesmere Rd Manufacturing
- Cliffside Bluffs
- Birchcliff Waterfront
- Scarborough Village
- Woburn Central
- Clairlea West
- Kennedy Rd
- Lawrence Ave E
- Scarborough Town Centre (STC)
- West Hill
- Rouge
- Highland Creek
FAQ · Mobile Welding in Scarborough
How fast can you get a welder to my Scarborough site?
Yes, most Scarborough calls get a same-day welder. We typically arrive within a 2 to 4 hour window on same-day dispatch, depending on where you are in the city and what's already on the schedule.
Do you work on active construction or industrial sites?
Yes. Our welders carry their own PPE, current WSIB clearance, and job documentation, so you can add us to a site without extra paperwork on your end.
Is CWB certification actually necessary for my job?
It depends. For structural steel connections on a commercial or industrial building, yes, it's required. For a residential gate or railing repair, it's not legally mandatory, but every CanaWelding welder carries it regardless, so you get the same standard either way.
Can you weld aluminum and stainless steel?
Yes. Our Scarborough crews TIG weld aluminum with grade-matched filler and handle stainless with grade-matched rod, ER308L, ER316L, or ER309L depending on the base material.
Do you offer stick welding, or just MIG and TIG?
Yes, stick welding (SMAW) is standard equipment on every Scarborough dispatch, alongside MIG and TIG. It's the right call for outdoor, windy, or rougher surface conditions where shielding gas would not hold.
Do you handle trailer and fleet repairs?
Yes. We dispatch to yards across Scarborough for frame, hitch, and body repairs on trailers and fleet equipment, no shop tow required.
Do you serve areas near Scarborough too?
Yes. Alongside Scarborough, CanaWelding covers the rest of the GTA, including Markham and Pickering/Ajax directly to the east, and North York to the west.
Get a Free Quote for Your Scarborough Welding Job
Tell us what needs welding and where in Scarborough you're located. We'll give you a clear price before any work starts, and in most cases, get a CWB-certified welder to your site the same day.